download
TOOLS ANDSUPPLIES REQUIRED Ratchet 11 mmSocket Torque wrench Isopropyl alcohol Shop towel HDS (Honda Diagnostic System) Snap-on TPMSsensorinitializer tool SPECIFICATIONS Models not equipped with standard 17″wheels: Models equipped with standard 17″wheels: Refer to the Owner’sManual. Rim size 17 x7J (offset 45) Tire side 215/45ZR1791W Bolthole PCD 114.3 (5 holes) Tire pressure Front 220kPa (2.2 kgf/cm2,32 psi) Rear 220kPa (2.2 kgf/cm2,32 psi) INSTALLATION NOTE: •This aluminum wheel is designed for use on the TPMS (Tire Pressure Monitoring System) vehicle. •This aluminum wheel is equipped with the TPMS sensor. Seethe Service Manual for tire replacement procedure andTPMSsensor installation procedure (paragraph of Tire Pressure Sensor Replacement). •The illustration of the aluminum wheels are shown for reference purposes only. •Installthe correct size tire. •Useatirechanger to remove and install the tires. Using a tire lever to remove and install the tires can damage to the tire, the wheel, and the TPMS sensor. •Thewheelnut torque is 108 N·m (80 lbf-ft) •The standard wheel nuts may not be used with the aluminum wheels. Replace them with the correct wheel nuts which are sold separately as described
